diff --git a/README b/README
index f49dd31fb1cbd85877581f6e7bc802aeddca12a9..c6186b231a3f9ad227692948590d819c967d50c9 100644
--- a/README
+++ b/README
@@ -249,7 +249,6 @@ options may be available there:
   --enable-ep93xx         Enable building support for EP93xx based SBCs
   --enable-at91rm9200     Enable building support for AT91RM9200 based SBCs
 
-  --enable-ecosboard      Enable building support for eCos based JTAG debugger
   --enable-zy1000         Enable ZY1000 interface
 
   --enable-minidriver-dummy
diff --git a/configure.ac b/configure.ac
index 0b337129b752e8c49f1c3b07f9bc9e8d4d63eca0..0a9a658676dd83daf79586f778e494df152e9cee 100644
--- a/configure.ac
+++ b/configure.ac
@@ -396,10 +396,6 @@ AC_ARG_ENABLE([amtjtagaccel],
   AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
   [build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
 
-AC_ARG_ENABLE([ecosboard],
-  AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
-  [build_ecosboard=$enableval], [build_ecosboard=no])
-
 AC_ARG_ENABLE([zy1000_master],
   AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]),
   [build_zy1000_master=$enableval], [build_zy1000_master=no])
@@ -632,12 +628,6 @@ else
   AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.])
 fi
 
-if test $build_ecosboard = yes; then
-  AC_DEFINE([BUILD_ECOSBOARD], [1], [1 if you want eCosBoard.])
-else
-  AC_DEFINE([BUILD_ECOSBOARD], [0], [0 if you don't want eCosBoard.])
-fi
-
 if test $build_zy1000 = yes; then
   AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.])
 else
@@ -1104,7 +1094,6 @@ AM_CONDITIONAL([PARPORT], [test $build_parport = yes])
 AM_CONDITIONAL([DUMMY], [test $build_dummy = yes])
 AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes])
 AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes])
-AM_CONDITIONAL([ECOSBOARD], [test $build_ecosboard = yes])
 AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes])
 AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
 AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
diff --git a/src/Makefile.am b/src/Makefile.am
index 3a92fffee3c43bd426a6f22c1001449fef026d7e..c78e81c801fb48324a30578460b0e21104b1ab3a 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -15,11 +15,7 @@ SUBDIRS = \
 lib_LTLIBRARIES = libopenocd.la
 bin_PROGRAMS = openocd
 
-if ECOSBOARD
-MAINFILE = ecosboard.c
-else
 MAINFILE = main.c
-endif
 
 openocd_SOURCES = $(MAINFILE)
 openocd_LDADD = libopenocd.la
diff --git a/src/ecosboard.c b/src/ecosboard.c
deleted file mode 100644
index 0805e6fcb93c2c88c5db1d606750cef2dc39021e..0000000000000000000000000000000000000000
--- a/src/ecosboard.c
+++ /dev/null
@@ -1,1670 +0,0 @@
-/***************************************************************************
- *   Copyright (C) 2007-2010 by Øyvind Harboe                              *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- ***************************************************************************/
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include <helper/types.h>
-#include <jtag/jtag.h>
-#include <helper/ioutil.h>
-#include <helper/util.h>
-#include <helper/configuration.h>
-
-#include <server/server.h>
-#include <server/telnet_server.h>
-#include <server/gdb_server.h>
-#include <openocd.h>
-
-#include <helper/time_support.h>
-
-#include <sys/time.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <cyg/io/flash.h>
-#include <pkgconf/fs_jffs2.h>	// Address of JFFS2
-#include <network.h>
-
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <cyg/fileio/fileio.h>
-#include <dirent.h>
-#include <cyg/athttpd/http.h>
-#include <cyg/athttpd/socket.h>
-#include <cyg/athttpd/handler.h>
-#include <cyg/athttpd/cgi.h>
-#include <cyg/athttpd/forms.h>
-#include <cyg/discover/discover.h>
-#include <cyg/io/io.h>
-#include <cyg/io/serialio.h>
-#include <netinet/tcp.h>
-#include <cyg/hal/hal_diag.h>
-
-#include "rom.h"
-
-#ifdef CYGPKG_HAL_NIOS2
-#include <cyg/hal/io.h>
-#define ZY1000_SER_DEV "/dev/uart_0"
-#else
-#define ZY1000_SER_DEV "/dev/ser0"
-
-#endif
-
-
-#define MAX_IFS 64
-#if defined(CYGPKG_NET_FREEBSD_STACK)
-#include <tftp_support.h>
-/* posix compatibility broken*/
-struct tftpd_fileops fileops =
-{
-	(int (*)(const char *, int))open,
-	close,
-	(int (*)(int, const void *, int))write,
-	(int (*)(int, void *, int))read
-};
-
-#endif
-
-
-void diag_write(char *buf, int len)
-{
-	int j;
-	for (j = 0; j < len; j++)
-	{
-		diag_printf("%c", buf[j]);
-	}
-}
-
-static bool serialLog = true;
-static bool writeLog = true;
-
-char hwaddr[512];
-
-#ifdef CYGPKG_PROFILE_GPROF
-#include <cyg/profile/profile.h>
-
-extern char _stext, _etext; // Defined by the linker
-
-static char *start_of_code=&_stext;
-static char *end_of_code=&_etext;
-
-void start_profile(void)
-{
-	// This starts up the system-wide profiling, gathering
-	// profile information on all of the code, with a 16 byte
-	// "bucket" size, at a rate of 100us/profile hit.
-	// Note: a bucket size of 16 will give pretty good function
-	//       resolution.  Much smaller and the buffer becomes
-	//       much too large for very little gain.
-	// Note: a timer period of 100us is also a reasonable
-	//       compromise.  Any smaller and the overhead of
-	//       handling the timter (profile) interrupt could
-	//       swamp the system.  A fast processor might get
-	//       by with a smaller value, but a slow one could
-	//       even be swamped by this value.  If the value is
-	//       too large, the usefulness of the profile is reduced.
-
-	// no more interrupts than 1/10ms.
-	//profile_on((void *)0, (void *)0x40000, 16, 10000); // SRAM
-	//	profile_on(0, &_etext, 16, 10000); // SRAM & DRAM
-	profile_on(start_of_code, end_of_code, 16, 10000); // Nios DRAM
-}
-#endif
-
-static FILE *log;
-
-static char reboot_stack[2048];
-
-static void zylinjtag_reboot(cyg_addrword_t data)
-{
-	serialLog = true;
-	diag_printf("Rebooting in 500 ticks..\n");
-	cyg_thread_delay(500);
-	diag_printf("Unmounting /config..\n");
-	umount("/config");
-	diag_printf("Rebooting..\n");
-#ifdef CYGPKG_HAL_NIOS2
-	/* This will reboot & reconfigure the FPGA from the bootloader
-	 * and on.
-	 */
-	IOWR(REMOTE_UPDATE_BASE, 0x20, 0x1);
-#else
-	HAL_PLATFORM_RESET();
-#endif
-}
-static cyg_thread zylinjtag_thread_object;
-static cyg_handle_t zylinjtag_thread_handle;
-
-void reboot(void)
-{
-	cyg_thread_create(1, zylinjtag_reboot, (cyg_addrword_t) 0, "reboot Thread",
-			(void *) reboot_stack, sizeof(reboot_stack),
-			&zylinjtag_thread_handle, &zylinjtag_thread_object);
-	cyg_thread_resume(zylinjtag_thread_handle);
-}
-
-static char zylinjtag_reboot_port_stack[2048];
-static cyg_thread zylinjtag_reboot_port_thread_object;
-static cyg_handle_t zylinjtag_reboot_port_thread_handle;
-
-static void zylinjtag_reboot_port_task(cyg_addrword_t data)
-{
-	int so_reuseaddr_option = 1;
-
-	int fd;
-	if ((fd = socket(AF_INET, SOCK_STREAM, 0)) == -1)
-	{
-		LOG_ERROR("error creating socket: %s", strerror(errno));
-		exit(-1);
-	}
-
-	setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (void*) &so_reuseaddr_option,
-			sizeof(int));
-
-	struct sockaddr_in sin;
-	unsigned int address_size;
-	address_size = sizeof(sin);
-	memset(&sin, 0, sizeof(sin));
-	sin.sin_family = AF_INET;
-	sin.sin_addr.s_addr = INADDR_ANY;
-	sin.sin_port = htons(1234);
-
-	if (bind(fd, (struct sockaddr *) &sin, sizeof(sin)) == -1)
-	{
-		LOG_ERROR("couldn't bind to socket: %s", strerror(errno));
-		exit(-1);
-	}
-
-	if (listen(fd, 1) == -1)
-	{
-		LOG_ERROR("couldn't listen on socket: %s", strerror(errno));
-		exit(-1);
-	}
-	//	socket_nonblock(fd);
-
-
-	accept(fd, (struct sockaddr *) &sin, &address_size);
-
-	diag_printf("Got reboot signal on port 1234");
-
-	reboot();
-
-}
-
-void reboot_port(void)
-{
-	cyg_thread_create(1, zylinjtag_reboot_port_task, (cyg_addrword_t) 0, "wait for reboot signal on port 1234",
-			(void *) zylinjtag_reboot_port_stack, sizeof(zylinjtag_reboot_port_stack),
-			&zylinjtag_reboot_port_thread_handle, &zylinjtag_reboot_port_thread_object);
-	cyg_thread_resume(zylinjtag_reboot_port_thread_handle);
-}
-
-int configuration_output_handler(struct command_context *context,
-		const char* line)
-{
-	diag_printf("%s", line);
-
-	return ERROR_OK;
-}
-
-int zy1000_configuration_output_handler_log(struct command_context *context,
-		const char* line)
-{
-	LOG_USER_N("%s", line);
-
-	return ERROR_OK;
-}
-
-#ifdef CYGPKG_PROFILE_GPROF
-//extern int64_t totaltime;
-
-static int zylinjtag_Jim_Command_profile(Jim_Interp *interp, int argc,
-		Jim_Obj * const *argv)
-{
-	if ((argc == 2) && (strcmp(Jim_GetString(argv[1], NULL), "stats")==0))
-	{
-//		profile_off();
-		//LOG_USER("Stats %dms sleeping in select()", (int)totaltime);
-	} else
-	{
-		LOG_USER("Profiling started");
-		start_profile();
-		//totaltime = 0;
-	}
-	return ERROR_OK;
-}
-
-#endif
-
-externC void phi_init_all_network_interfaces(void);
-
-struct command_context *cmd_ctx;
-
-static bool webRunning = false;
-
-void keep_webserver(void)
-{
-	// Target initialisation is only attempted at startup, so we sleep forever and
-	// let the http server bail us out(i.e. get config files set up).
-	diag_printf("OpenOCD has invoked exit().\n"
-		"Use web server to correct any configuration settings and reboot.\n");
-	if (!webRunning)
-		reboot();
-
-	// exit() will terminate the current thread and we we'll then sleep eternally or
-	// we'll have a reboot scheduled.
-}
-
-extern void printDccChar(char c);
-
-static char logBuffer[128 * 1024];
-static const int logSize = sizeof(logBuffer);
-int writePtr = 0;
-int logCount = 0;
-
-void _zylinjtag_diag_write_char(char c, void **param)
-{
-	if (writeLog)
-	{
-		logBuffer[writePtr] = c;
-		writePtr = (writePtr + 1) % logSize;
-		logCount++;
-	}
-	if (serialLog)
-	{
-		if (c == '\n')
-		{
-			HAL_DIAG_WRITE_CHAR('\r');
-		}
-		HAL_DIAG_WRITE_CHAR(c);
-	}
-
-#ifdef CYGPKG_HAL_ZYLIN_PHI
-	printDccChar(c);
-#endif
-}
-
-void copyfile(char *name2, char *name1);
-
-void copydir(char *name, char *destdir);
-
-#if 0
-MTAB_ENTRY(romfs_mte1,
-		"/rom",
-		"romfs",
-		"",
-		(CYG_ADDRWORD) &filedata[0]);
-#endif
-
-void openocd_sleep_prelude(void)
-{
-	cyg_mutex_unlock(&httpstate.jim_lock);
-}
-
-void openocd_sleep_postlude(void)
-{
-	cyg_mutex_lock(&httpstate.jim_lock);
-}
-
-void format(void)
-{
-#ifdef CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1
-	diag_printf("Formatting JFFS2...\n");
-
-	cyg_io_handle_t handle;
-
-	Cyg_ErrNo err;
-	err = cyg_io_lookup(CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1, &handle);
-	if (err != ENOERR)
-	{
-		diag_printf("Flash Error cyg_io_lookup: %d\n", err);
-		reboot();
-	}
-
-	cyg_uint32 len;
-	cyg_io_flash_getconfig_devsize_t ds;
-	len = sizeof(ds);
-	err = cyg_io_get_config(handle, CYG_IO_GET_CONFIG_FLASH_DEVSIZE, &ds, &len);
-	if (err != ENOERR)
-	{
-		diag_printf("Flash error cyg_io_get_config %d\n", err);
-		reboot();
-	}
-
-	cyg_io_flash_getconfig_erase_t e;
-	len = sizeof(e);
-
-	e.offset = 0;
-	e.len = ds.dev_size;
-
-	diag_printf("Formatting 0x%08x bytes\n", (int)ds.dev_size);
-	err = cyg_io_get_config(handle, CYG_IO_GET_CONFIG_FLASH_ERASE, &e, &len);
-	if (err != ENOERR)
-	{
-		diag_printf("Flash erase error %d offset 0x%08x\n", err, e.err_address);
-		reboot();
-	}
-
-	diag_printf("Flash formatted successfully\n");
-#endif
-
-	reboot();
-}
-
-static int zylinjtag_Jim_Command_format_jffs2(Jim_Interp *interp, int argc,
-		Jim_Obj * const *argv)
-{
-	if (argc != 1)
-	{
-		return JIM_ERR;
-	}
-
-	format();
-	for (;;)
-		;
-}
-
-static int zylinjtag_Jim_Command_threads(Jim_Interp *interp, int argc,
-		Jim_Obj * const *argv)
-{
-	cyg_handle_t thread = 0;
-	cyg_uint16 id = 0;
-	Jim_Obj *threads = Jim_NewListObj(interp, NULL, 0);
-
-	/* Loop over the threads, and generate a table row for
-	 * each.
-	 */
-	while (cyg_thread_get_next(&thread, &id))
-	{
-		Jim_Obj *threadObj = Jim_NewListObj(interp, NULL, 0);
-
-		cyg_thread_info info;
-		char *state_string;
-
-		cyg_thread_get_info(thread, id, &info);
-
-		if (info.name == NULL)
-			info.name = "<no name>";
-
-		Jim_ListAppendElement(interp, threadObj, Jim_NewStringObj(interp,
-				info.name, strlen(info.name)));
-
-		/* Translate the state into a string.
-		 */
-		if (info.state == 0)
-			state_string = "RUN";
-		else if (info.state & 0x04)
-			state_string = "SUSP";
-		else
-			switch (info.state & 0x1b)
-			{
-			case 0x01:
-				state_string = "SLEEP";
-				break;
-			case 0x02:
-				state_string = "CNTSLEEP";
-				break;
-			case 0x08:
-				state_string = "CREATE";
-				break;
-			case 0x10:
-				state_string = "EXIT";
-				break;
-			default:
-				state_string = "????";
-				break;
-			}
-
-		Jim_ListAppendElement(interp, threadObj, Jim_NewStringObj(interp,
-				state_string, strlen(state_string)));
-
-		Jim_ListAppendElement(interp, threadObj, Jim_NewIntObj(interp, id));
-		Jim_ListAppendElement(interp, threadObj, Jim_NewIntObj(interp,
-				info.set_pri));
-		Jim_ListAppendElement(interp, threadObj, Jim_NewIntObj(interp,
-				info.cur_pri));
-
-		Jim_ListAppendElement(interp, threads, threadObj);
-	}
-	Jim_SetResult(interp, threads);
-
-	return JIM_OK;
-}
-
-static int zylinjtag_Jim_Command_log(Jim_Interp *interp, int argc,
-		Jim_Obj * const *argv)
-{
-	Jim_Obj *tclOutput = Jim_NewStringObj(interp, "", 0);
-
-	if (logCount >= logSize)
-	{
-		Jim_AppendString(httpstate.jim_interp, tclOutput, logBuffer + logCount
-				% logSize, logSize - logCount % logSize);
-	}
-	Jim_AppendString(httpstate.jim_interp, tclOutput, logBuffer, writePtr);
-
-	Jim_SetResult(interp, tclOutput);
-	return JIM_OK;
-}
-
-static int zylinjtag_Jim_Command_reboot(Jim_Interp *interp, int argc,
-		Jim_Obj * const *argv)
-{
-	reboot();
-	return JIM_OK;
-}
-
-static void zylinjtag_startNetwork(void)
-{
-	// Bring TCP/IP up immediately before we're ready to accept commands.
-	//
-	// That is as soon as a PING responds, we're accepting telnet sessions.
-#if defined(CYGPKG_NET_FREEBSD_STACK)
-	phi_init_all_network_interfaces();
-#else
-	lwip_init();
-#endif
-	if (!eth0_up)
-	{
-		diag_printf("Network not up and running\n");
-		exit(-1);
-	}
-
-	/* very first thing we want is a reboot capability */
-	reboot_port();
-
-#if defined(CYGPKG_NET_FREEBSD_STACK)
-	/*start TFTP*/
-	tftpd_start(69, &fileops);
-#endif
-
-	cyg_httpd_init_tcl_interpreter();
-
-	// Kludge! Why can't I do this from httpd.c??? I get linker errors...
-	// some of that --start/end-group stuff?
-    Jim_InitStaticExtensions(httpstate.jim_interp);
-
-	Jim_CreateCommand(httpstate.jim_interp, "log", zylinjtag_Jim_Command_log,
-			NULL, NULL);
-	Jim_CreateCommand(httpstate.jim_interp, "zy1000_reboot",
-			zylinjtag_Jim_Command_reboot, NULL, NULL);
-	Jim_CreateCommand(httpstate.jim_interp, "threads",
-			zylinjtag_Jim_Command_threads, NULL, NULL);
-	Jim_CreateCommand(httpstate.jim_interp, "format_jffs2",
-			zylinjtag_Jim_Command_format_jffs2, NULL, NULL);
-
-	cyg_httpd_start();
-
-	webRunning = true;
-
-	diag_printf("Web server running\n");
-
-	int s;
-	struct ifreq ifr;
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s >= 0)
-	{
-		strcpy(ifr.ifr_name, "eth0");
-		int res;
-		res = ioctl(s, SIOCGIFHWADDR, &ifr);
-		close(s);
-
-		if (res < 0)
-		{
-			diag_printf("Can't obtain MAC address\n");
-			reboot();
-		}
-	}
-
-	sprintf(hwaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
-			(int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[0],
-			(int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[1],
-			(int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[2],
-			(int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[3],
-			(int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[4],
-			(int) ((unsigned char *) &ifr.ifr_hwaddr.sa_data)[5]);
-
-	discover_message
-			= alloc_printf("ZY1000 Zylin JTAG debugger MAC %s", hwaddr);
-
-	discover_launch();
-}
-
-static void print_exception_handler(cyg_addrword_t data, cyg_code_t exception,
-		cyg_addrword_t info)
-{
-	writeLog = false;
-	serialLog = true;
-	char *infoStr = "unknown";
-	switch (exception)
-	{
-#ifdef CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION
-	case CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION:
-	infoStr = "undefined instruction";
-	break;
-	case CYGNUM_HAL_VECTOR_SOFTWARE_INTERRUPT:
-	infoStr = "software interrupt";
-	break;
-	case CYGNUM_HAL_VECTOR_ABORT_PREFETCH:
-	infoStr = "abort prefetch";
-	break;
-	case CYGNUM_HAL_VECTOR_ABORT_DATA:
-	infoStr = "abort data";
-	break;
-#endif
-	default:
-		break;
-	}
-
-	diag_printf("Exception: %08x(%s) %08x\n", exception, infoStr, info);
-
-	diag_printf("Dumping log\n---\n");
-	if (logCount >= logSize)
-	{
-		diag_write(logBuffer + logCount % logSize, logSize - logCount % logSize);
-	}
-	diag_write(logBuffer, writePtr);
-
-	diag_printf("---\nLogdump complete.\n");
-	diag_printf("Exception: %08x(%s) %08x\n", exception, infoStr, info);
-	diag_printf("\n---\nRebooting\n");
-	HAL_PLATFORM_RESET();
-
-}
-
-#ifdef CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION
-static void setHandler(cyg_code_t exception)
-{
-	cyg_exception_handler_t *old_handler;
-	cyg_addrword_t old_data;
-
-	cyg_exception_set_handler(exception, print_exception_handler, 0,
-			&old_handler, &old_data);
-}
-#endif
-
-static cyg_thread zylinjtag_uart_thread_object;
-static cyg_handle_t zylinjtag_uart_thread_handle;
-static char uart_stack[4096];
-
-static char forwardBuffer[1024]; // NB! must be smaller than a TCP/IP packet!!!!!
-static char backwardBuffer[1024];
-
-void setNoDelay(int session, int flag)
-{
-#if 1
-	// This decreases latency dramatically for e.g. GDB load which
-	// does not have a sliding window protocol
-	//
-	// Can cause *lots* of TCP/IP packets to be sent and it would have
-	// to be enabled/disabled on the fly to avoid the CPU being
-	// overloaded...
-	setsockopt(session, /* socket affected */
-	IPPROTO_TCP, /* set option at TCP level */
-	TCP_NODELAY, /* name of option */
-	(char *) &flag, /* the cast is historical
-	 cruft */
-	sizeof(int)); /* length of option value */
-#endif
-}
-
-#define TEST_TCPIP() 0
-
-#if TEST_TCPIP
-struct
-{
-	int req;
-	int actual;
-	int req2;
-	int actual2;
-} tcpipSent[512 * 1024];
-int cur;
-#endif
-
-static void zylinjtag_uart(cyg_addrword_t data)
-{
-	int so_reuseaddr_option = 1;
-
-	int fd;
-	if ((fd = socket(AF_INET, SOCK_STREAM, 0)) == -1)
-	{
-		LOG_ERROR("error creating socket: %s", strerror(errno));
-		exit(-1);
-	}
-
-	setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (void*) &so_reuseaddr_option,
-			sizeof(int));
-
-	struct sockaddr_in sin;
-	unsigned int address_size;
-	address_size = sizeof(sin);
-	memset(&sin, 0, sizeof(sin));
-	sin.sin_family = AF_INET;
-	sin.sin_addr.s_addr = INADDR_ANY;
-	sin.sin_port = htons(5555);
-
-	if (bind(fd, (struct sockaddr *) &sin, sizeof(sin)) == -1)
-	{
-		LOG_ERROR("couldn't bind to socket: %s", strerror(errno));
-		exit(-1);
-	}
-
-	if (listen(fd, 1) == -1)
-	{
-		LOG_ERROR("couldn't listen on socket: %s", strerror(errno));
-		exit(-1);
-	}
-	//	socket_nonblock(fd);
-
-
-	for (;;)
-	{
-		int session = accept(fd, (struct sockaddr *) &sin, &address_size);
-		if (session < 0)
-		{
-			continue;
-		}
-
-		setNoDelay(session, 1);
-		int oldopts = fcntl(session, F_GETFL, 0);
-		fcntl(session, F_SETFL, oldopts | O_NONBLOCK); //
-
-		int serHandle = open(ZY1000_SER_DEV, O_RDWR | O_NONBLOCK);
-		if (serHandle < 0)
-		{
-			close(session);
-			continue;
-		}
-
-#ifdef CYGPKG_PROFILE_GPROF
-		start_profile();
-#endif
-		size_t actual = 0;
-		size_t actual2 = 0;
-		size_t pos, pos2;
-		pos = 0;
-		pos2 = 0;
-#if TEST_TCPIP
-		cur = 0;
-#endif
-		for (;;)
-		{
-			fd_set write_fds;
-			fd_set read_fds;
-			FD_ZERO(&write_fds);
-			FD_ZERO(&read_fds);
-			int fd_max = -1;
-			FD_SET(session, &read_fds);
-			fd_max = session;
-			FD_SET(serHandle, &read_fds);
-			if (serHandle > fd_max)
-			{
-				fd_max = serHandle;
-			}
-			/* Wait... */
-
-			cyg_thread_delay(5); // 50ms fixed delay to wait for data to be sent/received
-			if ((actual == 0) && (actual2 == 0))
-			{
-				int retval = select(fd_max + 1, &read_fds, NULL, NULL, NULL);
-				if (retval <= 0)
-				{
-					break;
-				}
-			}
-
-			if (actual2 <= 0)
-			{
-				memset(backwardBuffer, 's', sizeof(backwardBuffer));
-				int t;
-				t = read(serHandle, backwardBuffer,
-						sizeof(backwardBuffer));
-				actual2 = t;
-				if (t < 0)
-				{
-					if (errno != EAGAIN)
-					{
-						goto closeSession;
-					}
-					actual2 = 0;
-				}
-				pos2 = 0;
-			}
-
-			size_t y = 0;
-			if (actual2 > 0)
-			{
-				int written = write(session, backwardBuffer + pos2, actual2);
-				if (written <= 0)
-					goto closeSession;
-				actual2 -= written;
-				pos2 += written;
-				y = written;
-			}
-
-			if (FD_ISSET(session, &read_fds)
-					&& (sizeof(forwardBuffer) > actual))
-			{
-				// NB! Here it is important that we empty the TCP/IP read buffer
-				// to make transmission tick right
-				memmove(forwardBuffer, forwardBuffer + pos, actual);
-				pos = 0;
-				int t;
-				// this will block if there is no data at all
-				t = read_socket(session, forwardBuffer + actual,
-						sizeof(forwardBuffer) - actual);
-				if (t <= 0)
-				{
-					goto closeSession;
-				}
-				actual += t;
-			}
-
-			int y2 = 0;
-			if (actual > 0)
-			{
-				/* Do not put things into the serial buffer if it has something to send
-				 * as that can cause a single byte to be sent at the time.
-				 *
-				 *
-				 */
-				int written = write(serHandle, forwardBuffer + pos, actual);
-				if (written < 0)
-				{
-					if (errno != EAGAIN)
-					{
-						goto closeSession;
-					}
-					// The serial buffer is full
-					written = 0;
-				}
-				else
-				{
-					actual -= written;
-					pos += written;
-				}
-				y2 = written;
-			}
-#if TEST_TCPIP
-			if (cur < 1024)
-			{
-				tcpipSent[cur].req = x;
-				tcpipSent[cur].actual = y;
-				tcpipSent[cur].req2 = x2;
-				tcpipSent[cur].actual2 = y2;
-				cur++;
-			}
-#endif
-		}
-		closeSession: close(session);
-		close(serHandle);
-
-#if TEST_TCPIP
-		int i;
-		for (i = 0; i < 1024; i++)
-		{
-			diag_printf("%d %d %d %d\n", tcpipSent[i].req, tcpipSent[i].actual,
-					tcpipSent[i].req2, tcpipSent[i].actual2);
-
-		}
-#endif
-	}
-	close(fd);
-
-}
-
-void startUart(void)
-{
-	cyg_thread_create(1, zylinjtag_uart, (cyg_addrword_t) 0, "uart thread",
-			(void *) uart_stack, sizeof(uart_stack),
-			&zylinjtag_uart_thread_handle, &zylinjtag_uart_thread_object);
-	cyg_thread_set_priority(zylinjtag_uart_thread_handle, 1); // low priority as it sits in a busy loop
-	cyg_thread_resume(zylinjtag_uart_thread_handle);
-}
-
-static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
-		Jim_Obj * const *argv)
-{
-	static int current_baud = 38400;
-	if (argc == 1)
-	{
-		Jim_SetResult(interp, Jim_NewIntObj(interp, current_baud));
-		return JIM_OK;
-	}
-	else if (argc != 2)
-	{
-		return JIM_ERR;
-	}
-
-	long new_baudrate;
-	if (Jim_GetLong(interp, argv[1], &new_baudrate) != JIM_OK)
-		return JIM_ERR;
-
-	current_baud = new_baudrate;
-
-	int baud;
-	switch (current_baud)
-	{
-	case 9600:
-		baud = CYGNUM_SERIAL_BAUD_9600;
-		break;
-	case 19200:
-		baud = CYGNUM_SERIAL_BAUD_19200;
-		break;
-	case 38400:
-		baud = CYGNUM_SERIAL_BAUD_38400;
-		break;
-	case 57600:
-		baud = CYGNUM_SERIAL_BAUD_57600;
-		break;
-	case 115200:
-		baud = CYGNUM_SERIAL_BAUD_115200;
-		break;
-	case 230400:
-		baud = CYGNUM_SERIAL_BAUD_230400;
-		break;
-	default:
-		Jim_SetResult(interp, Jim_NewStringObj(interp, "unsupported baudrate", -1));
-		return JIM_ERR;
-	}
-
-	cyg_serial_info_t buf;
-	cyg_uint32 len = 1;
-	//get existing serial configuration
-	len = sizeof(cyg_serial_info_t);
-	int err;
-	cyg_io_handle_t serial_handle;
-
-	err = cyg_io_lookup(ZY1000_SER_DEV, &serial_handle);
-	if (err != ENOERR)
-	{
-		Jim_SetResult(interp, Jim_NewStringObj(interp, "Could not open serial port", -1));
-		return JIM_ERR;
-	}
-
-	err = cyg_io_get_config(serial_handle,
-			CYG_IO_GET_CONFIG_SERIAL_OUTPUT_DRAIN, &buf, &len);
-	err = cyg_io_get_config(serial_handle, CYG_IO_GET_CONFIG_SERIAL_INFO, &buf,
-			&len);
-	if (err != ENOERR)
-	{
-		Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to get serial port settings", -1));
-		return JIM_ERR;
-	}
-	buf.baud = baud;
-
-	err = cyg_io_set_config(serial_handle, CYG_IO_SET_CONFIG_SERIAL_INFO, &buf,
-			&len);
-	if (err != ENOERR)
-	{
-		Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to set serial port settings", -1));
-		return JIM_ERR;
-	}
-
-	return JIM_OK;
-}
-
-bool logAllToSerial = false;
-
-
-int boolParam(char *var);
-
-
-static const char *zylin_config_dir="/config/settings";
-
-static int add_default_dirs(void)
-{
-	add_script_search_dir(zylin_config_dir);
-	add_script_search_dir("/rom/lib/openocd");
-	add_script_search_dir("/rom");
-	return ERROR_OK;
-}
-
-int main(int argc, char *argv[])
-{
-	/* ramblockdevice will be the same address every time. The deflate app uses a buffer 16mBytes out, so we
-	 * need to allocate towards the end of the heap.  */
-
-#ifdef CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION
-	setHandler(CYGNUM_HAL_VECTOR_UNDEF_INSTRUCTION);
-	setHandler(CYGNUM_HAL_VECTOR_ABORT_PREFETCH);
-	setHandler(CYGNUM_HAL_VECTOR_ABORT_DATA);
-#endif
-
-	int err;
-
-	atexit(keep_webserver);
-
-	diag_init_putc(_zylinjtag_diag_write_char);
-	// We want this in the log.
-#ifdef CYGPKG_HAL_NIOS2
-	diag_printf("Zylin ZY1000 PCB revc.\n");
-#else
-	diag_printf("Zylin ZY1000 PCB revb.\n");
-#endif
-
-	err = mount("", "/ram", "ramfs");
-	if (err < 0)
-	{
-		diag_printf("unable to mount ramfs\n");
-	}
-	chdir("/ram");
-
-	char address[16];
-	sprintf(address, "%p", &filedata[0]);
-	err = mount(address, "/rom", "romfs");
-	if (err < 0)
-	{
-		diag_printf("unable to mount /rom\n");
-	}
-
-	err = mount("", "/log", "logfs");
-	if (err < 0)
-	{
-		diag_printf("unable to mount logfs\n");
-	}
-
-	err = mount("", "/tftp", "tftpfs");
-	if (err < 0)
-	{
-		diag_printf("unable to mount logfs\n");
-	}
-
-	log = fopen("/log/log", "w");
-	if (log == NULL)
-	{
-		diag_printf("Could not open log file /ram/log\n");
-		exit(-1);
-	}
-
-
-	copydir("/rom", "/ram/cgi");
-
-#ifdef CYGPKG_HAL_NIOS2
-	cyg_flashaddr_t err_address;
-#define UNCACHED_EXT_FLASH_BASE (0x80000000 + EXT_FLASH_BASE)
-	/* The revc flash is locked upon reset, unlock it */
-#ifdef CYGHWR_IO_FLASH_BLOCK_LOCKING
-	if ((err = flash_unlock((void *) UNCACHED_EXT_FLASH_BASE, EXT_FLASH_SPAN,
-			(void **) &err_address)) != 0)
-	{
-		diag_printf("Error: could not unlock flash\n");
-	}
-#endif
-#endif
-
-
-	err = mount("/dev/flash1", "/config", "jffs2");
-	if (err < 0)
-	{
-		diag_printf("unable to mount jffs2, falling back to ram disk..\n");
-		err = mount("", "/config", "ramfs");
-		if (err < 0)
-		{
-			diag_printf("unable to mount /config as ramdisk.\n");
-			reboot();
-		}
-	}
-	else
-	{
-		/* are we using a ram disk instead of a flash disk? This is used
-		 * for ZY1000 live demo...
-		 *
-		 * copy over flash disk to ram block device
-		 */
-		if (boolParam("ramdisk"))
-		{
-			diag_printf("Unmounting /config from flash and using ram instead\n");
-			err = umount("/config");
-			if (err < 0)
-			{
-				diag_printf("unable to unmount jffs\n");
-				reboot();
-			}
-
-			err = mount("/dev/flash1", "/config2", "jffs2");
-			if (err < 0)
-			{
-				diag_printf("unable to mount jffs\n");
-				reboot();
-			}
-
-			err = mount("", "/config", "ramfs");
-			if (err < 0)
-			{
-				diag_printf("unable to mount ram block device\n");
-				reboot();
-			}
-
-			//		copydir("/config2", "/config");
-			copyfile("/config2/ip", "/config/ip");
-			copydir("/config2/settings", "/config/settings");
-
-			umount("/config2");
-		}
-	}
-
-	mkdir(zylin_config_dir, 0777);
-	char *dirname = alloc_printf("%s/target", zylin_config_dir);
-	mkdir(dirname, 0777);
-	free(dirname);
-	dirname = alloc_printf("%s/board", zylin_config_dir);
-	mkdir(dirname, 0777);
-	free(dirname);
-	dirname = alloc_printf("%s/event", zylin_config_dir);
-	mkdir(dirname, 0777);
-	free(dirname);
-
-	logAllToSerial = boolParam("logserial");
-
-	// We need the network & web server in case there is something wrong with
-	// the config files that invoke exit()
-	zylinjtag_startNetwork();
-
-	/* we're going to access the jim interpreter from here on... */
-	openocd_sleep_postlude();
-	startUart();
-
-	add_default_dirs();
-
-	/* initialize commandline interface */
-	struct command_context * cmd_ctx;
-	struct command_context *setup_command_handler(Jim_Interp *interp);
-	cmd_ctx = setup_command_handler(httpstate.jim_interp);
-	command_set_output_handler(cmd_ctx, configuration_output_handler, NULL);
-	command_context_mode(cmd_ctx, COMMAND_CONFIG);
-
-	if (util_init(cmd_ctx) != ERROR_OK)
-		return EXIT_FAILURE;
-
-	if (ioutil_init(cmd_ctx) != ERROR_OK)
-		return EXIT_FAILURE;
-
-#ifdef CYGPKG_PROFILE_GPROF
-	Jim_CreateCommand(httpstate.jim_interp, "zy1000_profile", zylinjtag_Jim_Command_profile,
-			NULL, NULL);
-#endif
-
-	Jim_CreateCommand(httpstate.jim_interp, "zy1000_uart", zylinjtag_Jim_Command_uart, NULL, NULL);
-
-
-	log_init();
-
-	set_log_output(cmd_ctx, log);
-
-	LOG_DEBUG("log init complete");
-
-	//	diag_printf("Executing config files\n");
-
-	if (logAllToSerial)
-	{
-		diag_printf(
-				 "%s/logserial = 1 => sending log output to serial port using \"debug_level 3\" as default.\n", zylin_config_dir);
-		command_run_line(cmd_ctx, "debug_level 3");
-	}
-
-	command_run_linef(cmd_ctx, "script /rom/openocd.cfg");
-
-	int ret;
-	ret = server_init(cmd_ctx);
-	if (ERROR_OK != ret)
-		return EXIT_FAILURE;
-
-	/* we MUST always run the init command as it will launch telnet sessions */
-	command_run_line(cmd_ctx, "init");
-
-	// FIX!!!  Yuk!
-	// diag_printf() is really invoked from many more places than we trust it
-	// not to cause instabilities(e.g. invoking fputc() from an interrupt is *BAD*).
-	//
-	// Disabling it here is safe and gives us enough logged debug output for now. Crossing
-	// fingers that it doesn't cause any crashes.
-	diag_printf("Init complete, GDB & telnet servers launched.\n");
-	command_set_output_handler(cmd_ctx,
-			zy1000_configuration_output_handler_log, NULL);
-	if (!logAllToSerial)
-	{
-		serialLog = false;
-	}
-
-	/* handle network connections */
-	server_loop(cmd_ctx);
-	openocd_sleep_prelude();
-
-	/* shut server down */
-	server_quit();
-
-	/* free commandline interface */
-	command_done(cmd_ctx);
-	umount("/config");
-
-	exit(0);
-	for (;;)
-		;
-}
-
-cyg_int32 cyg_httpd_exec_cgi_tcl(char *file_name);
-cyg_int32 homeForm(CYG_HTTPD_STATE *p)
-{
-	cyg_httpd_exec_cgi_tcl("/ram/cgi/index.tcl");
-	return 0;
-}
-
-CYG_HTTPD_HANDLER_TABLE_ENTRY(root_label, "/", homeForm);
-
-CYG_HTTPD_MIME_TABLE_ENTRY(text_mime_label, "text", "text/plain");
-CYG_HTTPD_MIME_TABLE_ENTRY(bin_mime_label, "bin", "application/octet-stream");
-
-#include <pkgconf/system.h>
-#include <pkgconf/hal.h>
-#include <pkgconf/kernel.h>
-#include <pkgconf/io_fileio.h>
-#include <pkgconf/fs_rom.h>
-
-#include <cyg/kernel/ktypes.h>         // base kernel types
-#include <cyg/infra/cyg_trac.h>        // tracing macros
-#include <cyg/infra/cyg_ass.h>         // assertion macros
-#include <cyg/fileio/fileio.h>
-#include <cyg/kernel/kapi.h>
-#include <cyg/infra/diag.h>
-
-//==========================================================================
-// Eventually we want to eXecute In Place from the ROM in a protected
-// environment, so we'll need executables to be aligned to a boundary
-// suitable for MMU protection. A suitable boundary would be the 4k
-// boundary in all the CPU architectures I am currently aware of.
-
-// Forward definitions
-
-// Filesystem operations
-static int tftpfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte);
-static int tftpfs_umount(cyg_mtab_entry *mte);
-static int tftpfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name,
-		int mode, cyg_file *fte);
-static int tftpfs_fo_read(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio);
-static int tftpfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio);
-
-// File operations
-static int tftpfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode);
-static int tftpfs_fo_close(struct CYG_FILE_TAG *fp);
-static int tftpfs_fo_lseek(struct CYG_FILE_TAG *fp, off_t *apos, int whence);
-
-//==========================================================================
-// Filesystem table entries
-
-// -------------------------------------------------------------------------
-// Fstab entry.
-// This defines the entry in the filesystem table.
-// For simplicity we use _FILESYSTEM synchronization for all accesses since
-// we should never block in any filesystem operations.
-#if 1
-FSTAB_ENTRY(tftpfs_fste, "tftpfs", 0,
-		CYG_SYNCMODE_NONE,
-		tftpfs_mount,
-		tftpfs_umount,
-		tftpfs_open,
-		(cyg_fsop_unlink *)cyg_fileio_erofs,
-		(cyg_fsop_mkdir *)cyg_fileio_erofs,
-		(cyg_fsop_rmdir *)cyg_fileio_erofs,
-		(cyg_fsop_rename *)cyg_fileio_erofs,
-		(cyg_fsop_link *)cyg_fileio_erofs,
-		(cyg_fsop_opendir *)cyg_fileio_erofs,
-		(cyg_fsop_chdir *)cyg_fileio_erofs,
-		(cyg_fsop_stat *)cyg_fileio_erofs,
-		(cyg_fsop_getinfo *)cyg_fileio_erofs,
-		(cyg_fsop_setinfo *)cyg_fileio_erofs);
-#endif
-
-// -------------------------------------------------------------------------
-// mtab entry.
-// This defines a single ROMFS loaded into ROM at the configured address
-//
-// MTAB_ENTRY(rom_mte,	// structure name
-// 		"/rom",		// mount point
-// 		"romfs",	// FIlesystem type
-// 		"",		// hardware device
-//  (CYG_ADDRWORD) CYGNUM_FS_ROM_BASE_ADDRESS	// Address in ROM
-//);
-
-
-// -------------------------------------------------------------------------
-// File operations.
-// This set of file operations are used for normal open files.
-
-static cyg_fileops tftpfs_fileops =
-{ tftpfs_fo_read, tftpfs_fo_write, tftpfs_fo_lseek,
-		(cyg_fileop_ioctl *) cyg_fileio_erofs, cyg_fileio_seltrue,
-		tftpfs_fo_fsync, tftpfs_fo_close,
-		(cyg_fileop_fstat *) cyg_fileio_erofs,
-		(cyg_fileop_getinfo *) cyg_fileio_erofs,
-		(cyg_fileop_setinfo *) cyg_fileio_erofs, };
-
-// -------------------------------------------------------------------------
-// tftpfs_mount()
-// Process a mount request. This mainly finds root for the
-// filesystem.
-
-static int tftpfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte)
-{
-	return ENOERR;
-}
-
-static int tftpfs_umount(cyg_mtab_entry *mte)
-{
-	return ENOERR;
-}
-
-struct Tftp
-{
-	int write;
-	int readFile;
-	cyg_uint8 *mem;
-	int actual;
-	char *server;
-	int port;
-	char *file;
-};
-
-static void freeTftp(struct Tftp *t)
-{
-	if (t == NULL)
-		return;
-	if (t->mem)
-		free(t->mem);
-	if (t->server)
-		free(t->server);
-	if (t->file)
-		free(t->file);
-	free(t);
-}
-
-static const int tftpMaxSize = 8192 * 1024;
-static int tftpfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name,
-		int mode, cyg_file *file)
-{
-	struct Tftp *tftp;
-	tftp = malloc(sizeof(struct Tftp));
-	if (tftp == NULL)
-		return EMFILE;
-	memset(tftp, 0, sizeof(struct Tftp));
-
-	file->f_flag |= mode & CYG_FILE_MODE_MASK;
-	file->f_type = CYG_FILE_TYPE_FILE;
-	file->f_ops = &tftpfs_fileops;
-	file->f_offset = 0;
-	file->f_data = 0;
-	file->f_xops = 0;
-
-	tftp->mem = malloc(tftpMaxSize);
-	if (tftp->mem == NULL)
-	{
-		freeTftp(tftp);
-		return EMFILE;
-	}
-
-	char *server = strchr(name, '/');
-	if (server == NULL)
-	{
-		freeTftp(tftp);
-		return EMFILE;
-	}
-
-	tftp->server = malloc(server - name + 1);
-	if (tftp->server == NULL)
-	{
-		freeTftp(tftp);
-		return EMFILE;
-	}
-	strncpy(tftp->server, name, server - name);
-	tftp->server[server - name] = 0;
-
-	tftp->port = 0; /* default port 69 */
-	char *port;
-	port = strchr(tftp->server, ':');
-	if (port != NULL)
-	{
-		tftp->port = atoi(port + 1);
-		*port = 0;
-	}
-
-	tftp->file = strdup(server + 1);
-	if (tftp->file == NULL)
-	{
-		freeTftp(tftp);
-		return EMFILE;
-	}
-
-	file->f_data = (CYG_ADDRWORD) tftp;
-
-	return ENOERR;
-}
-
-static int fetchTftp(struct Tftp *tftp)
-{
-	if (!tftp->readFile)
-	{
-		int err;
-		tftp->actual = tftp_client_get(tftp->file, tftp->server, tftp->port, tftp->mem,
-				tftpMaxSize, TFTP_OCTET, &err);
-
-		if (tftp->actual < 0)
-		{
-			return EMFILE;
-		}
-		tftp->readFile = 1;
-	}
-	return ENOERR;
-}
-
-// -------------------------------------------------------------------------
-// tftpfs_fo_write()
-// Read data from file.
-
-static int tftpfs_fo_read(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio)
-{
-	struct Tftp *tftp = (struct Tftp *) fp->f_data;
-
-	if (fetchTftp(tftp) != ENOERR)
-		return EMFILE;
-
-	int i;
-	off_t pos = fp->f_offset;
-	int resid = 0;
-	for (i = 0; i < uio->uio_iovcnt; i++)
-	{
-		cyg_iovec *iov = &uio->uio_iov[i];
-		char *buf = (char *) iov->iov_base;
-		off_t len = iov->iov_len;
-
-		if (len + pos > tftp->actual)
-		{
-			len = tftp->actual - pos;
-		}
-		resid += iov->iov_len - len;
-
-		memcpy(buf, tftp->mem + pos, len);
-		pos += len;
-
-	}
-	uio->uio_resid = resid;
-	fp->f_offset = pos;
-
-	return ENOERR;
-}
-
-static int tftpfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio)
-{
-	struct Tftp *tftp = (struct Tftp *) fp->f_data;
-
-	int i;
-	off_t pos = fp->f_offset;
-	int resid = 0;
-	for (i = 0; i < uio->uio_iovcnt; i++)
-	{
-		cyg_iovec *iov = &uio->uio_iov[i];
-		char *buf = (char *) iov->iov_base;
-		off_t len = iov->iov_len;
-
-		if (len + pos > tftpMaxSize)
-		{
-			len = tftpMaxSize - pos;
-		}
-		resid += iov->iov_len - len;
-
-		memcpy(tftp->mem + pos, buf, len);
-		pos += len;
-
-	}
-	uio->uio_resid = resid;
-	fp->f_offset = pos;
-
-	tftp->write = 1;
-
-	return ENOERR;
-}
-
-static int tftpfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode)
-{
-	int error = ENOERR;
-	return error;
-}
-
-// -------------------------------------------------------------------------
-// romfs_fo_close()
-// Close a file. We just clear out the data pointer.
-
-static int tftpfs_fo_close(struct CYG_FILE_TAG *fp)
-{
-	struct Tftp *tftp = (struct Tftp *) fp->f_data;
-	int error = ENOERR;
-
-	if (tftp->write)
-	{
-		tftp_client_put(tftp->file, tftp->server, 0, tftp->mem, fp->f_offset,
-				TFTP_OCTET, &error);
-	}
-
-	freeTftp(tftp);
-	fp->f_data = 0;
-	return error;
-}
-
-// -------------------------------------------------------------------------
-// romfs_fo_lseek()
-// Seek to a new file position.
-
-static int tftpfs_fo_lseek(struct CYG_FILE_TAG *fp, off_t *apos, int whence)
-{
-	struct Tftp *tftp = (struct Tftp *) fp->f_data;
-	off_t pos = *apos;
-
-	if (fetchTftp(tftp) != ENOERR)
-		return EMFILE;
-
-	switch (whence)
-	{
-	case SEEK_SET:
-		// Pos is already where we want to be.
-		break;
-
-	case SEEK_CUR:
-		// Add pos to current offset.
-		pos += fp->f_offset;
-		break;
-
-	case SEEK_END:
-		// Add pos to file size.
-		pos += tftp->actual;
-		break;
-
-	default:
-		return EINVAL;
-	}
-
-	// Check that pos is still within current file size, or at the
-	// very end.
-	if (pos < 0 || pos > tftp->actual)
-		return EINVAL;
-
-	// All OK, set fp offset and return new position.
-	*apos = fp->f_offset = pos;
-
-	return ENOERR;
-}
-
-void usleep(int us)
-{
-	if (us > 10000)
-		cyg_thread_delay(us / 10000 + 1);
-	else
-		HAL_DELAY_US(us);
-}
-
-// Chunked version.
-cyg_int32 show_log_entry(CYG_HTTPD_STATE *phttpstate)
-{
-	cyg_httpd_start_chunked("text");
-	if (logCount >= logSize)
-	{
-		cyg_httpd_write_chunked(logBuffer + logCount % logSize, logSize
-				- logCount % logSize);
-	}
-	cyg_httpd_write_chunked(logBuffer, writePtr);
-	cyg_httpd_end_chunked();
-	return -1;
-}
-
-CYG_HTTPD_HANDLER_TABLE_ENTRY(show_log, "/ram/log", show_log_entry);
-
-// Filesystem operations
-static int logfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte);
-static int logfs_umount(cyg_mtab_entry *mte);
-static int logfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name,
-		int mode, cyg_file *fte);
-static int logfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio);
-
-// File operations
-static int logfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode);
-static int logfs_fo_close(struct CYG_FILE_TAG *fp);
-
-#include <cyg/io/devtab.h>
-
-//==========================================================================
-// Filesystem table entries
-
-// -------------------------------------------------------------------------
-// Fstab entry.
-// This defines the entry in the filesystem table.
-// For simplicity we use _FILESYSTEM synchronization for all accesses since
-// we should never block in any filesystem operations.
-FSTAB_ENTRY(logfs_fste, "logfs", 0,
-		CYG_SYNCMODE_FILE_FILESYSTEM | CYG_SYNCMODE_IO_FILESYSTEM,
-		logfs_mount,
-		logfs_umount,
-		logfs_open,
-		(cyg_fsop_unlink *)cyg_fileio_erofs,
-		(cyg_fsop_mkdir *)cyg_fileio_erofs,
-		(cyg_fsop_rmdir *)cyg_fileio_erofs,
-		(cyg_fsop_rename *)cyg_fileio_erofs,
-		(cyg_fsop_link *)cyg_fileio_erofs,
-		(cyg_fsop_opendir *)cyg_fileio_erofs,
-		(cyg_fsop_chdir *)cyg_fileio_erofs,
-		(cyg_fsop_stat *)cyg_fileio_erofs,
-		(cyg_fsop_getinfo *)cyg_fileio_erofs,
-		(cyg_fsop_setinfo *)cyg_fileio_erofs);
-
-// -------------------------------------------------------------------------
-// File operations.
-// This set of file operations are used for normal open files.
-
-static cyg_fileops logfs_fileops =
-{ (cyg_fileop_read *) cyg_fileio_erofs, (cyg_fileop_write *) logfs_fo_write,
-		(cyg_fileop_lseek *) cyg_fileio_erofs,
-		(cyg_fileop_ioctl *) cyg_fileio_erofs, cyg_fileio_seltrue,
-		logfs_fo_fsync, logfs_fo_close, (cyg_fileop_fstat *) cyg_fileio_erofs,
-		(cyg_fileop_getinfo *) cyg_fileio_erofs,
-		(cyg_fileop_setinfo *) cyg_fileio_erofs, };
-
-// -------------------------------------------------------------------------
-// logfs_mount()
-// Process a mount request. This mainly finds root for the
-// filesystem.
-
-static int logfs_mount(cyg_fstab_entry *fste, cyg_mtab_entry *mte)
-{
-	return ENOERR;
-}
-
-static int logfs_umount(cyg_mtab_entry *mte)
-{
-	return ENOERR;
-}
-
-static int logfs_open(cyg_mtab_entry *mte, cyg_dir dir, const char *name,
-		int mode, cyg_file *file)
-{
-	file->f_flag |= mode & CYG_FILE_MODE_MASK;
-	file->f_type = CYG_FILE_TYPE_FILE;
-	file->f_ops = &logfs_fileops;
-	file->f_offset = 0;
-	file->f_data = 0;
-	file->f_xops = 0;
-	return ENOERR;
-}
-
-// -------------------------------------------------------------------------
-// logfs_fo_write()
-// Write data to file.
-
-static int logfs_fo_write(struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio)
-{
-	int i;
-	for (i = 0; i < uio->uio_iovcnt; i++)
-	{
-		cyg_iovec *iov = &uio->uio_iov[i];
-		char *buf = (char *) iov->iov_base;
-		off_t len = iov->iov_len;
-
-		diag_write(buf, len);
-	}
-	uio->uio_resid = 0;
-
-	return ENOERR;
-}
-static int logfs_fo_fsync(struct CYG_FILE_TAG *fp, int mode)
-{
-	return ENOERR;
-}
-
-// -------------------------------------------------------------------------
-// romfs_fo_close()
-// Close a file. We just clear out the data pointer.
-
-static int logfs_fo_close(struct CYG_FILE_TAG *fp)
-{
-	return ENOERR;
-}
-
-int loadFile(const char *fileName, void **data, int *len);
-
-/* boolean parameter stored on config */
-int boolParam(char *var)
-{
-	bool result = false;
-	char *name = alloc_printf("%s/%s", zylin_config_dir, var);
-	if (name == NULL)
-		return result;
-
-	void *data;
-	int len;
-	if (loadFile(name, &data, &len) == ERROR_OK)
-	{
-		if (len > 1)
-			len = 1;
-		result = strncmp((char *) data, "1", len) == 0;
-		free(data);
-	}
-	free(name);
-	return result;
-}
-
diff --git a/src/helper/Makefile.am b/src/helper/Makefile.am
index c9479b43edb18aba62a6f098f952e75d63059262..6189b63ab1ab69f58d55fde635ed0d370cca288e 100644
--- a/src/helper/Makefile.am
+++ b/src/helper/Makefile.am
@@ -3,13 +3,7 @@ include $(top_srcdir)/common.mk
 METASOURCES = AUTO
 noinst_LTLIBRARIES = libhelper.la
 
-if ECOSBOARD
-CONFIGFILES = time_support_ecos.c
-else
 CONFIGFILES = options.c time_support_common.c
-endif
-
-
 
 libhelper_la_SOURCES = \
 	binarybuffer.c \
diff --git a/src/helper/command.c b/src/helper/command.c
index c218f3fc0b9afabbfbf4df6fe915ebac2955ce03..fb1a709a5dee6f65c4f326e105a6d561a0bdf70e 100644
--- a/src/helper/command.c
+++ b/src/helper/command.c
@@ -31,10 +31,8 @@
 #include "config.h"
 #endif
 
-#if !BUILD_ECOSBOARD
 /* see Embedder-HOWTO.txt in Jim Tcl project hosted on BerliOS*/
 #define JIM_EMBEDDED
-#endif
 
 /* @todo the inclusion of target.h here is a layering violation */
 #include <jtag/jtag.h>
@@ -1280,7 +1278,6 @@ struct command_context *command_init(const char *startup_tcl, Jim_Interp *interp
 	context->output_handler = NULL;
 	context->output_handler_priv = NULL;
 
-#if !BUILD_ECOSBOARD
 	/* Create a jim interpreter if we were not handed one */
 	if (interp == NULL) {
 		/* Create an interpreter */
@@ -1289,7 +1286,7 @@ struct command_context *command_init(const char *startup_tcl, Jim_Interp *interp
 		Jim_RegisterCoreCommands(interp);
 		Jim_InitStaticExtensions(interp);
 	}
-#endif
+
 	context->interp = interp;
 
 	/* Stick to lowercase for HostOS strings. */
@@ -1349,7 +1346,6 @@ int command_context_mode(struct command_context *cmd_ctx, enum command_mode mode
 
 void process_jim_events(struct command_context *cmd_ctx)
 {
-#if !BUILD_ECOSBOARD
 	static int recursion;
 	if (recursion)
 		return;
@@ -1357,7 +1353,6 @@ void process_jim_events(struct command_context *cmd_ctx)
 	recursion++;
 	Jim_ProcessEvents(cmd_ctx->interp, JIM_ALL_EVENTS | JIM_DONT_WAIT);
 	recursion--;
-#endif
 }
 
 #define DEFINE_PARSE_NUM_TYPE(name, type, func, min, max) \
diff --git a/src/helper/command.h b/src/helper/command.h
index 01316a1a56d1c23292ac2bb3ec8411f515e3916d..7cd5cc4c76fcf23205f3acaf5a993e6d7879da97 100644
--- a/src/helper/command.h
+++ b/src/helper/command.h
@@ -26,12 +26,6 @@
 
 #include <helper/types.h>
 
-/* Integrate the JIM TCL interpretor into the command processing. */
-#if BUILD_ECOSBOARD
-#include <stdio.h>
-#include <stdarg.h>
-#endif
-
 #include <jim.h>
 #include <jim-nvp.h>
 
diff --git a/src/helper/ioutil.c b/src/helper/ioutil.c
index 4e9d6878eae396b72b3c533ac80b630aaffbcc20..684950d148899a888754179d8b939402b2835dce 100644
--- a/src/helper/ioutil.c
+++ b/src/helper/ioutil.c
@@ -48,10 +48,8 @@
 #include <ifaddrs.h>
 #endif
 #ifdef HAVE_MALLOC_H
-#if !BUILD_ECOSBOARD
 #include <malloc.h>
 #endif
-#endif
 
 /* loads a file and returns a pointer to it in memory. The file contains
  * a 0 byte(sentinel) after len bytes - the length of the file. */
diff --git a/src/helper/replacements.h b/src/helper/replacements.h
index 6f2e959519090163e3ca645b3479df698b58d2fc..ceb22584ccaa7fed50887989bfbfc017842f143d 100644
--- a/src/helper/replacements.h
+++ b/src/helper/replacements.h
@@ -128,12 +128,8 @@ static inline unsigned usleep(unsigned int usecs)
 	return 0;
 }
 #else
-#if BUILD_ECOSBOARD
-void usleep(int us);
-#else
 #error no usleep defined for your platform
 #endif
-#endif
 #endif	/* HAVE_USLEEP */
 
 /* Windows specific */
diff --git a/src/helper/system.h b/src/helper/system.h
index 85e0b1ee91413c76278816453b89b2e9dd2a8c5e..82d0cae7e8b1027d0134c30f60efa6a25597762e 100644
--- a/src/helper/system.h
+++ b/src/helper/system.h
@@ -45,9 +45,6 @@
 /* --- AC_HEADER_TIME --- */
 
 /* +++ platform specific headers +++ */
-#if BUILD_ECOSBOARD == 1
-#include <pkgconf/system.h>
-#endif
 #ifdef _WIN32
 #include <winsock2.h>
 #include <ws2tcpip.h>
diff --git a/src/helper/time_support_ecos.c b/src/helper/time_support_ecos.c
deleted file mode 100644
index 110edd24e828c28dd759dc7df0e13f12f1895c81..0000000000000000000000000000000000000000
--- a/src/helper/time_support_ecos.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/***************************************************************************
- *   Copyright (C) 2006 by Dominic Rath                                    *
- *   Dominic.Rath@gmx.de                                                   *
- *                                                                         *
- *   Copyright (C) 2007,2008 Øyvind Harboe                                 *
- *   oyvind.harboe@zylin.com                                               *
- *                                                                         *
- *   Copyright (C) 2008 by Spencer Oliver                                  *
- *   spen@spen-soft.co.uk                                                  *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- ***************************************************************************/
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "time_support.h"
-
-#include <cyg/kernel/kapi.h>
-
-int64_t timeval_ms()
-{
-	/* Faster/less noisy implementation of getting ms when
-	 * profiling
-	 */
-	static const int ms_per_tick =
-		(CYGNUM_HAL_RTC_NUMERATOR / CYGNUM_HAL_RTC_DENOMINATOR) / 1000000;
-	cyg_tick_count_t cur_time = cyg_current_time();
-	return ((int)cur_time) * ms_per_tick;
-}
diff --git a/src/jtag/zy1000/jtag_minidriver.h b/src/jtag/zy1000/jtag_minidriver.h
index 15d921838ad41346ffe3b5e094b4478cd37be803..ac6da53632445745590855dc57c4d197bfb04423 100644
--- a/src/jtag/zy1000/jtag_minidriver.h
+++ b/src/jtag/zy1000/jtag_minidriver.h
@@ -23,17 +23,10 @@
 
 #if BUILD_ZY1000_MASTER
 
-#if BUILD_ECOSBOARD
-#include <cyg/hal/hal_io.h>		/* low level i/o */
-#include <cyg/hal/hal_intr.h>			/* low level i/o */
-#define ZY1000_PEEK(a, b) HAL_READ_UINT32(a, b)
-#define ZY1000_POKE(a, b) HAL_WRITE_UINT32(a, b)
-#else
 #define ZY1000_PEEK(a, b) do {b = *((volatile uint32_t *)(a)); } while (0)
 #define ZY1000_POKE(a, b) do {*((volatile uint32_t *)(a)) = b; } while (0)
 extern volatile void *zy1000_jtag_master;
 #define ZY1000_JTAG_BASE ((unsigned long)zy1000_jtag_master)
-#endif
 
 #else
 
diff --git a/src/jtag/zy1000/zy1000.c b/src/jtag/zy1000/zy1000.c
index e61a61839010b6d237eab872f4f3db0b96be9b37..027049d84bbaf926dbfafffcbd533f0f9700ba25 100644
--- a/src/jtag/zy1000/zy1000.c
+++ b/src/jtag/zy1000/zy1000.c
@@ -55,30 +55,8 @@
 
 #include <netinet/tcp.h>
 
-#if BUILD_ECOSBOARD
-#include "zy1000_version.h"
-
-#include <cyg/hal/hal_io.h>		/* low level i/o */
-#include <cyg/hal/hal_diag.h>
-
-#ifdef CYGPKG_HAL_NIOS2
-#include <cyg/hal/io.h>
-#include <cyg/firmwareutil/firmwareutil.h>
-#define ZYLIN_KHZ 60000
-#else
-#define ZYLIN_KHZ 64000
-#endif
-
-#define ZYLIN_VERSION GIT_ZY1000_VERSION
-#define ZYLIN_DATE __DATE__
-#define ZYLIN_TIME __TIME__
-#define ZYLIN_OPENOCD GIT_OPENOCD_VERSION
-#define ZYLIN_OPENOCD_VERSION "ZY1000 " ZYLIN_VERSION " " ZYLIN_DATE
-
-#else
 /* Assume we're connecting to a revc w/60MHz clock. */
 #define ZYLIN_KHZ 60000
-#endif
 
 /* The software needs to check if it's in RCLK mode or not */
 static bool zy1000_rclk;
@@ -312,111 +290,6 @@ static int jim_zy1000_server(Jim_Interp *interp, int argc, Jim_Obj * const *argv
 }
 #endif
 
-#if BUILD_ECOSBOARD
-/* Give TELNET a way to find out what version this is */
-static int jim_zy1000_version(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
-{
-	if ((argc < 1) || (argc > 3))
-		return JIM_ERR;
-	const char *version_str = NULL;
-
-	if (argc == 1)
-		version_str = ZYLIN_OPENOCD_VERSION;
-	else {
-		const char *str = Jim_GetString(argv[1], NULL);
-		const char *str2 = NULL;
-		if (argc > 2)
-			str2 = Jim_GetString(argv[2], NULL);
-		if (strcmp("openocd", str) == 0)
-			version_str = ZYLIN_OPENOCD;
-		else if (strcmp("zy1000", str) == 0)
-			version_str = ZYLIN_VERSION;
-		else if (strcmp("date", str) == 0)
-			version_str = ZYLIN_DATE;
-		else if (strcmp("time", str) == 0)
-			version_str = ZYLIN_TIME;
-		else if (strcmp("pcb", str) == 0) {
-#ifdef CYGPKG_HAL_NIOS2
-			version_str = "c";
-#else
-			version_str = "b";
-#endif
-		}
-#ifdef CYGPKG_HAL_NIOS2
-		else if (strcmp("fpga", str) == 0) {
-
-			/* return a list of 32 bit integers to describe the expected
-			 * and actual FPGA
-			 */
-			static char *fpga_id = "0x12345678 0x12345678 0x12345678 0x12345678";
-			uint32_t id, timestamp;
-			HAL_READ_UINT32(SYSID_BASE, id);
-			HAL_READ_UINT32(SYSID_BASE+4, timestamp);
-			sprintf(fpga_id,
-				"0x%08x 0x%08x 0x%08x 0x%08x",
-				id,
-				timestamp,
-				SYSID_ID,
-				SYSID_TIMESTAMP);
-			version_str = fpga_id;
-			if ((argc > 2) && (strcmp("time", str2) == 0)) {
-				time_t last_mod = timestamp;
-				char *t = ctime(&last_mod);
-				t[strlen(t)-1] = 0;
-				version_str = t;
-			}
-		}
-#endif
-
-		else
-			return JIM_ERR;
-	}
-
-	Jim_SetResult(interp, Jim_NewStringObj(interp, version_str, -1));
-
-	return JIM_OK;
-}
-#endif
-
-#ifdef CYGPKG_HAL_NIOS2
-
-
-struct info_forward {
-	void *data;
-	struct cyg_upgrade_info *upgraded_file;
-};
-
-static void report_info(void *data, const char *format, va_list args)
-{
-	char *s = alloc_vprintf(format, args);
-	LOG_USER_N("%s", s);
-	free(s);
-}
-
-struct cyg_upgrade_info firmware_info = {
-	(uint8_t *)0x84000000,
-	"/ram/firmware.phi",
-	"Firmware",
-	0x0300000,
-	0x1f00000 -
-	0x0300000,
-	"ZylinNiosFirmware\n",
-	report_info,
-};
-
-/* File written to /ram/firmware.phi before arriving at this fn */
-static int jim_zy1000_writefirmware(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
-{
-	if (argc != 1)
-		return JIM_ERR;
-
-	if (!cyg_firmware_upgrade(NULL, firmware_info))
-		return JIM_ERR;
-
-	return JIM_OK;
-}
-#endif
-
 static int zylinjtag_Jim_Command_powerstatus(Jim_Interp *interp,
 	int argc,
 	Jim_Obj * const *argv)
@@ -918,17 +791,7 @@ static const struct command_registration zy1000_commands[] = {
 			"With no arguments, prints status.",
 		.usage = "('on'|'off)",
 	},
-#if BUILD_ZY1000_MASTER
-#if BUILD_ECOSBOARD
-	{
-		.name = "zy1000_version",
-		.mode = COMMAND_ANY,
-		.jim_handler = jim_zy1000_version,
-		.help = "Print version info for zy1000.",
-		.usage = "['openocd'|'zy1000'|'date'|'time'|'pcb'|'fpga']",
-	},
-#endif
-#else
+#if !BUILD_ZY1000_MASTER
 	{
 		.name = "zy1000_server",
 		.mode = COMMAND_ANY,
@@ -943,15 +806,6 @@ static const struct command_registration zy1000_commands[] = {
 		.jim_handler = zylinjtag_Jim_Command_powerstatus,
 		.help = "Returns power status of target",
 	},
-#ifdef CYGPKG_HAL_NIOS2
-	{
-		.name = "updatezy1000firmware",
-		.mode = COMMAND_ANY,
-		.jim_handler = jim_zy1000_writefirmware,
-		.help = "writes firmware to flash",
-		/* .usage = "some_string", */
-	},
-#endif
 	COMMAND_REGISTRATION_DONE
 };
 
@@ -1269,12 +1123,6 @@ static void writeShiftValue(uint8_t *data, int bits)
 
 #if BUILD_ZY1000_MASTER
 
-#if BUILD_ECOSBOARD
-static char watchdog_stack[2048];
-static cyg_thread watchdog_thread_object;
-static cyg_handle_t watchdog_thread_handle;
-#endif
-
 #ifdef WATCHDOG_BASE
 /* If we connect to port 8888 we must send a char every 10s or the board resets itself */
 static void watchdog_server(cyg_addrword_t data)
@@ -1359,16 +1207,14 @@ int interface_jtag_add_sleep(uint32_t us)
 }
 #endif
 
-#if BUILD_ZY1000_MASTER && !BUILD_ECOSBOARD
+#if BUILD_ZY1000_MASTER
 volatile void *zy1000_jtag_master;
 #include <sys/mman.h>
 #endif
 
 int zy1000_init(void)
 {
-#if BUILD_ECOSBOARD
-	LOG_USER("%s", ZYLIN_OPENOCD_VERSION);
-#elif BUILD_ZY1000_MASTER
+#if BUILD_ZY1000_MASTER
 	int fd = open("/dev/mem", O_RDWR | O_SYNC);
 	if (fd == -1) {
 		LOG_ERROR("No access to /dev/mem");
@@ -1400,17 +1246,6 @@ int zy1000_init(void)
 	/* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */
 	zy1000_reset(0, 0);
 
-#if BUILD_ZY1000_MASTER
-#if BUILD_ECOSBOARD
-#ifdef WATCHDOG_BASE
-	cyg_thread_create(1, watchdog_server, (cyg_addrword_t) 0, "watchdog tcip/ip server",
-		(void *) watchdog_stack, sizeof(watchdog_stack),
-		&watchdog_thread_handle, &watchdog_thread_object);
-	cyg_thread_resume(watchdog_thread_handle);
-#endif
-#endif
-#endif
-
 	return ERROR_OK;
 }
 
diff --git a/src/server/Makefile.am b/src/server/Makefile.am
index a7c318ce696b3016dbbe90a5486de0fc64f98d1d..04d3035f452870fda945cd3721f88a6a6bc5cd1f 100644
--- a/src/server/Makefile.am
+++ b/src/server/Makefile.am
@@ -5,9 +5,7 @@ noinst_LTLIBRARIES = libserver.la
 noinst_HEADERS = server.h telnet_server.h gdb_server.h
 libserver_la_SOURCES = server.c telnet_server.c gdb_server.c
 
-if !ECOSBOARD
 libserver_la_SOURCES += server_stubs.c
-endif
 
 libserver_la_CFLAGS =
 if IS_MINGW
diff --git a/src/server/server.h b/src/server/server.h
index b6ff5ed932fbeb7ff1085dfc85729a9644b534fb..bbcfdc0fafb045c04968bd42f84081604d533e5d 100644
--- a/src/server/server.h
+++ b/src/server/server.h
@@ -87,11 +87,11 @@ int connection_write(struct connection *connection, const void *data, int len);
 int connection_read(struct connection *connection, void *data, int len);
 
 /**
- * Used by server_loop(), defined in server_stubs.c or ecosboard.c
+ * Used by server_loop(), defined in server_stubs.c
  */
 void openocd_sleep_prelude(void);
 /**
- * Used by server_loop(), defined in server_stubs.c or ecosboard.c
+ * Used by server_loop(), defined in server_stubs.c
  */
 void openocd_sleep_postlude(void);