diff --git a/UrumbotXY-Fall2022/README.md b/UrumbotXY-Fall2022/README.md
index 0e74d2ac0e87866b3353ec6b13404875728b58c4..2eac8842804519f52d2fc20c57d6cb2dd9f792d7 100644
--- a/UrumbotXY-Fall2022/README.md
+++ b/UrumbotXY-Fall2022/README.md
@@ -49,34 +49,35 @@ XY_plate and table:  two-bearing side (left) and
 one-bearing side with adjuster (right).<br>
 
 ### Assemble motor on motor mount.
-<img src=img/aaa.jpg width=300>
-<img src=img/aaa.jpg width=300>
-<img src=img/aaa.jpg width=300>
-
-
+<img src=img/capstan.jpg width=300>
 
 ### Assemble pulleys on pulley mount.
-<img src=img/aaa.jpg width=300>
-<img src=img/aaa.jpg width=300>
-<img src=img/aaa.jpg width=300>
-
 
 ### Assemble X1 frame part with feet.  Add Y1 and Y2 frame members.
-<img src=img/aaa.jpg width=300>
-<img src=img/aaa.jpg width=300>
-<img src=img/aaa.jpg width=300>
+<img src=img/assemble_frame.jpg width=300>
 
 ### Add motor mounts.
+<img src=img/3_beams_assembled.jpg width=300>
 
 ### Place xy-plate on x-beam, and attach y-plates.
+<img src=img/x_beam_assembly.jpg width=300>
+<img src=img/x_beam_assembled.jpg width=300>
 
 ### Add to frame.
+<img src=img/3_beams_assembled.jpg width=300>
+
 
 ### Add final beam frame member.
+<img src=img/add_x2.jpg width=300>
+
 
 ### Add pulley plate and adjust feet.
+<img src=img/assembled.jpg width=300>
+
 
 ### Add string.
+<img src=img/1_string.jpg width=300>
+<img src=img/2_strings.jpg width=300>
 
 Note how the string is inserted on the capstans. The string can be attached to temporary anchor points to provide enough tension during this step. Inside `capstan_pulley`, you should insert a small bearing at the top and bottom. Use appropriate washers to have the correct height; there are 4 levels on `capstan_pulley`, and they should be aligned between each levels of `capstan_motor`.