Skip to content
Snippets Groups Projects
Select Git revision
  • 093604febf721632eb7deabbb28b169870d90485
  • master default protected
2 results

UrumbotXYZ

Robert's avatar
Rob Hart authored
fe32525b
History

Integrated XYZ machines from Urumbu axis components.

The goal is to make an integrated xyz machine from the urumbu axis parts that can machine PCBs and cut wax/wood in a volume of 150x150x50 mm.

Machine using xy table and a fixed cam-driven z-axis.

This machine is documented here.. It does a nice job of machining PCB traces, but with a few mm of travel, is a specialist.

Machine with short z-axis moving on x-beam.

A short z-axis was mounted on the x-beam of the Core-xy table. The first iteration of this design lacked the stifness needed to machine PCB's and wax. Details are here.

Machine with short z-axis fixed to the frame. Moving table.

The same axes were rearranged so that the z-axis was fixed relative to the frame, and the xy- carriage supports a moving table. This arrangement was nearly stiff enough to machine PCBs and wax. Details

Machine with short z-axis fixed to the frame. Moving table with double x-beam. May 2022

Details