Skip to content
Snippets Groups Projects
Select Git revision
  • main default protected
1 result

README.md

Blame
  • open-frame-scan

    This device is an open-source approach to scanning flat surfaces. The frame is simply placed on top of the surface to scan, and a computer vision software analyzes the picture to extract a rectified picture with real dimensions (pixels/unit).

    This project is inspired by the Shaper Trace, but offers an open source interface and lets users scan color images, not just vectors.

    designs

    There are three different sizes:

    Outer dimensions Content size
    Small 170x250mm 130x210mm
    Medium 240x320mm 180x260mm
    Large 300x380mm 240x320mm

    The smallest one can be printed on an A4 page (or letter size), and the largest one can fully scan a page of that size. The medium size is an in-between, with a similar form factor as the Shaper Trace.

    Fabrication

    Vinyl cutting

    If you have access to digital fabrication tools, the most straightforward way to build your frame is to laser cut the shape, then vinyl cut the features to be added onto it.

    The first step is to weed the vinyl in place:

    The result is then stuck onto transfer tape and laid flat:

    After joining to the frame, the transfer is peeled off, revealing the finished frame:

    Inkjet printing

    Alternatively, you can print the design of the frame using an inkjet printer, then glue it to a thin piece of cardboard:

    The small frame is designed to be printable on an A4 page (or letter), and the medium frame fits on an A3 page.

    Results

    Grid scan

    To quantify the accuracy of the scanning, a 25mm calibration grid was built:

    Here is the image used for analysis, showing the detected features (aruco markers in blue, corners in red):

    Here is the extracted image:

    The grid feature points are automatically extracted:

    Finally, the distance between neighboring grid points is measured, revealing the accuracy of the scanning process. Here is a comparison of all frames, including the Shaper Trace, showing improved accuracy and less variance:

    Here are numerical results:

    mean [mm] stdev [mm]
    small1 25.098 0.126
    small2 25.017 0.102
    medium1 25.048 0.123
    medium2 25.056 0.123
    large 25.086 0.112
    Shaper Trace 24.888 0.201

    Resilience to fabrication error

    To test the resilience of the scanning to process to fabrication errors, a distorted frame was designed and built. Its feature points are deviated horizontally and vertically with a standard deviation of 1mm.

    Thanks to the least squares optimization when retrieving the perspective transform, this error is successfully dampened. The results are shown in the table above, under the name medium2; as seen, the precision is the same as medium1, which was built with a tolerance of <0.4mm .